Racelogic USER GUIDE Guide de l'utilisateur télécharger pdf (Page 11)

VBOX MICRO MANUAL

Page | 11 06 August 2014

Log settings

To adjust the logging mode and the log rate of the VBOX Micro, open the ‘Logging’ tab in Racelogic Config.

Once the logging mode and rate have been set, click the ‘Write Settings’ button to program the new

configuration into the VBOX Micro.

The log rate is shown as a frequency (in Hz) and also as a time period (in ms). Both options are linked so if

one is altered the other setting will automatically reflect the change.

Time/Date

The VBOX Micro uses time and date information available from GPS satellites. This time is based around

UTC (approximately equal to GMT) so if the VBOX Micro is used in a different time zone the local time

should be set inside the VBOX Micro for ease of use.

As the time and date are critical to the creation of file names in the VBOX Micro, it is recommended that

the local time is correctly set.

Adding or subtracting an offset on the GPS page of Racelogic Config adjusts the local time.

Once the offset has been set click the ‘Write Settings’ button to program the new time and date into the

VBOX Micro.

NOTE: In order to obtain UTC time, the VBOX Micro must have attained satellite lock.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Pas de commentaire

Racelogic USER GUIDE Guide de l'utilisateur Page 11