Racelogic VBOX II Guide de l'utilisateur télécharger pdf (Page 25)

Racelogic Ltd Predictive Mode

02/05/2014 Page 25

Once a valid reference lap has been created or loaded, the Drift Box will begin predicting. The

prediction is shown in text and graph format which is a graphical representation of the amount of

time gained or lost around the lap.

When a lap has been completed this screen is displayed for five seconds before reverting back to

the prediction screen.

Fixed Lap

In predictive mode your reference lap will change if it is faster then the previous. Pressing the OK

button will fix your current lap, preventing it from changing. Pressing OK again on the same lap,

cancels the fixing. Pressing OK on a later lap will cause that one to be fixed.

If you decide to load a lap file from the SD card, it will automatically become the fixed reference lap.

Anything that resets predictive mode will put the unit back in to normal non fixed predictive mode.

This includes pressing the reset button, clearing splits or performing a power cycle.

You are able to set the scale of the bar display with each gradation representing a set number of

seconds. The options available are 0-2s, 0-5s, 0-10s and 0-30s. This can be changed by selecting

MENU and then BAR RANGE.

To save a reference lap, Press MENU and then select SAVE REFERENCE.

If you wish to clear your reference lap to enable you to create a new one, holding down the RESET

button will allow to you to do so. Clearing the split points on Laptiming mode will also reset the

reference lap. Please note, once you create a new reference lap, the previously saved one will be

overwritten.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 71 72

Pas de commentaire

Racelogic VBOX II Guide de l'utilisateur Page 25