Racelogic VBOX II Guide de l'utilisateur télécharger pdf (Page 30)

Racelogic Ltd Power Mode

02/05/2014 Page 30

Input Module Screen

The Input Module screen provides the ability to configure the input and output channels of a

connected Micro Input Module and view the data on each of the input module channels.

NB: This mode requires the RS232 chip upgrade in order to function.

Input module connection

The PBOX connects to a Micro Input Module using an RLCAB045 cable plugged into the Auxiliary

connector on the back of the PBOX to the DATA socket on the Micro Input Module. If an input

module is connected to a PBOX and it has been initialised then the PerformanceBox will

automatically log all of the input module channels to the SD card.

Initialising the Micro Input module.

In order for the PerformanceBox to log the input module data channels, the Input Module screen

must be accessed whilst the input module is connected and the PerformanceBox has satellite lock.

After the Input Module screen has been accessed the screen will briefly display the following

message.

Then the screen will display the data output diagnostic screen. Once this has happened the

PerformanceBox will log the input module data. In firmware revision 1.4.76 and above a new

display can be accessed by pressing down in this mode.

This screen displays Speed and a selected input module channel. To select an input module

channel press the MENU button then navigate through the list to select display channel. From this

screen any one of the MICIN01 channels can be selected.

NOTE: After each power up, the Input Module Screen on the PerformanceBox must be accessed

in order for the PerformanceBox to recognise the presence of the MICIN01. After this has been

done, then any of the PerformanceBox screens can be used, but this must be done or the MICIN01

channels will not be logged.

Configuring the Inputs and Outputs

See the Micro Input Module user guide for a full explanation of configuring the inputs and outputs

of a Micro Input Module.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 71 72

Pas de commentaire

Racelogic VBOX II Guide de l'utilisateur Page 30