Racelogic USER GUIDE Manuel d'instructions Page 13
- Page / 35
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Revision 13 Page 13 of 35
The LabSat is set up according to the diagram opposite.
1. Connect power to the LabSat.
2. Connect the Active GPS antenna to the RF IN port of the LabSat.
3. Connect the high speed USB cable to the computer on which the
Scenario data file is to be recorded. It is possible to connect an
external USB drive to the computer and stream the recorded file
directly onto this drive.
4. Start the LabSat software.
Before recording Scenario data it is important to observe certain criteria,
failure to follow these precautions may result in satellite data dropouts or
corrupt data contained within the recorded file.
Very Important: Running Background Applications if Logging to Computer
The LabSat has a two second USB buffer, but due to the exceptionally high data rates and processing power utilised by the LabSat USB bus when
recording GPS L1 data, it is important to have no other applications running on the computer and not to start any other applications whilst the
LabSat is recording data. Also make sure you do not start to move windows around, or do anything which takes processing power away from the
LabSat application, as Windows can occasionally stall for more than 2 seconds when launching/running other applications. Even though you may
have multiple USB ports on your computer, in most cases they all share the same bus. Therefore try to limit any activity using additional USB
devices.
Recording Data to an External Drive:
It is recommended that any external drive used to record scenarios is formatted in the NTFS format. The FAT32 format has a file size limit of 4 GB,
which is equivalent to about 34 minutes of recording. The USB drives supplied with the LabSat are pre-formatted using the NTFS file format.
5. Once the LabSat software is running, LabSat is now ready to record data.
6. Click the Browse Button. The user will be prompted to enter the filename and choose the location of the recorded file.
- Instruction Manual LabSat 1
- Contents 2
- Introduction 3
- Operation 4
- LabSat Equipment 5
- Connector overview 6
- PC Requirements 7
- Installing LabSat Software 7
- USB - 5 8
- Software Overview 9
- LabSat Settings Menu 10
- Attenuation 19
- Control Slider 19
- Advanced 19
- Playback 19
- Control 19
- RF data for GLONASS 23
- SatGen Software 24
- Interface Modules 25
- Video Synchronisation 26
- Troubleshooting Guide 29
- LabSat Specifications 30
- Connector Pinout Data 31
- Module Dimensions 34
- Contact Details 35
Produits connexes et manuels pour Navigateurs Racelogic USER GUIDE
Navigateurs Racelogic VBOX II Manuel
(19 pages)
(19 pages)
Sony VGN-TX670P manuals
Owner’s manuals and user’s guides for Laptops Sony VGN-TX670P.
We providing 1 pdf manuals Sony VGN-TX670P for download free by document types: User Manual
Commentaires sur ces manuels