Racelogic USER GUIDE Manuel d'utilisateur télécharger pdf (Page 16)

RACELOGIC Traction Control Manual V3.0

Page 16

1.7 Fitting the traction control switch

The traction control switch will need to be mounted on the car where the driver can

adjust it while driving. The launch button can be fitted away from the switch by

extending the two grey wires. When installed, the switch will need to be connected to

the switch wire on the traction control loom. Connect the switch to the loom colour for

colour, making sure the connections are covered with the heatshrink provided.

The adjuster connects to a three core cable from the main traction loom. This cable

consists of a red, a green and a blue wire.

Manual Slip Adjuster installed in a Holden HSV

Launch Button and Manual Slip Adjuster installed in a Nissan 300ZX

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 66 67

Pas de commentaire

Racelogic USER GUIDE Manuel d'utilisateur Page 16